You are here
PRESSURE MEMBRANE EXTRACTOR, 100 BARS
- Soil Water Retention
- Soil Physics
Pressure: 100 bar Weight: 66kgs (146 lbs). Dimensions: 17X17X12 inches
The 1020, 100 Bar Pressure Membrane Extractor, is used to analyze the water-holding characteristics of soil samples at extremely high pressures. The Pressure Membrane Extractor uses a cellulose membrane supported on a screen drain plate. The cylinder is 2" (5 cm) high, with an inside diameter of 10" (25 cm). The 1020 consists of top and bottom plates, cylinder, all connecting bolts and seals, screen drain plate, and a side exhaust valve. You will need the 0750G4 Manifold (sold separately) to run the 1020 Extractor. Other items you will need are cellulose membranes (1041D12), soil sample retaining rings (1093F1), and an electrical leadthrough (1066) are available separately.
1020 PRESSURE MEMBRANE EXTRACTOR, 100 BARS