Envco – Environmental Equipment

The Spill Buddy Pro combines an interface meter with the Spill Buddy's free product skimming capability. The integrated measuring tape and audible feedback allow the user to determine the distance to the product surface, the depth of the product, and then to pump the accumulated product. It averages about 0.5 gallons of product per minute (approximately 35 gallons in an hour of continuous pumping).

Features and Benefits -
• Compact and lightweight - won't weigh you down.
• Self-contained battery operation, with convenient option to re-charge in vehicle between sites.
• Keeps pumping water to a bare minimum (unless desired!).
• Guides operator to interface with audible signals- eliminates guesswork.
• Spill Buddy Pro can take your interface readings and then pump available product, all in one step!

The Spill Buddy Pro's interface tape is marked in tenths and hundredths of feet; metric tapes are also available. The standard English unit includes a 50 foot down-well probe; the standard metric unit has a 15 meter probe. A 75 foot (23 meters) probe is also an option.
System Specifications
The Complete Spill Buddy or Spill Buddy Pro includes:
Portable reel with 50 feet (15 meters) of down-well tubing and pump with water interface detector (Spill Buddy Pro also has a product surface sensor, and built-in interface measurement tape); VAC wall transformer charger, and 10 feet of nylon NAPL discharge tubing.

Minimum skimming thickness: 0.1 inch with no water pumped or 0 inches with a small amount of water pumped
Pumping rate: Approx. 0.5 gpm for Spill Buddy Pro
Pumping head: 100 ft
Pumping time: 1 hour continuous pumping per battery charge (approx. 40 gallons of Product)
Battery: 12VDC, 5 Amp hours sealed lead acid (included) (We recommend a second battery for a backup on site)
Battery charger: Wall transformer. A cigarette-lighter jack is available as an option for charging between sites.
Fluids: Most hydrocarbons, floaters (LNAPLS) or sinkers (DNAPLS) Exception: The Spill Buddy and Spill Buddy Pro are not compatible for use with Halogenated Hydrocarbons.

Viscosity Ranges
Standard Pump- 0 to 10cp at 700°F
Optional Medium Viscosity Pump- Up to 25cp

Operating temperature: 0° to 130°F ambient temperature
Size: 18 1/2"H x 15"W x 8 1/2"D
Weight: 19 lbs (with battery)

Accessories -
Optional 100 foot down-well probe for the Spill Buddy
Optional 75 foot down-well probe for the Spill Buddy Pro
Optional replacement battery
Optional Power Socket Charger ("cigarette lighter" jack)

Ordering Information
Spill Buddy Pro System System Please specify 110 or 220 volt charger

- Includes:
Portable Unit with water interface and product surface detectors
Product Pump / Probe with 50 Feet of Tubing
10 Feet of Discharge Tubing with Clamp
Integral Metric Interface Tape
Self Contained Rechargeable Battery
Wall-Mount Battery Charger
One Year Warranty on Parts
90 Day Warranty on Pumps
Operations Manual