Request list

is empty

You are here

AMS Soggy Bottom Sampler System

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface.

AMS Soggy Bottom Sampler System stops caving sediment!

To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods attached to the internal drive tip are retracted and removed, and additional extensions are added. Then, the internal drive tip is released and retained in a chamber at the top of the sampler. Next, the slide hammer is attached, and the sampler is driven down to collect the sample. Once the sample has been collected, the rods and sampler are back-hammered out of the bore hole.

If sampling in harder or tighter sediments, the rods and sampler can be jacked out of the sample boring using the optional removal jack and pull cap. After removal, the sampler disassembles easily to allow access to the sample liners which can then be capped off for transport to the lab.

Features include:
• Two o-rings are used on the internal drive tip to minimise the chance of cross-contamination
• Core catcher helps prevent the loss of the sediment sample
• The sampler can take continuous or discrete samples from the sediment surface to 4' in depth

Includes: Sampler, one (1) 4' x 1 1/2" O.D. plastic liner, two (2) 2' x 1 1/2" O.D. plastic liners, one (1) top metal catcher, one (1) plastic basket retainer, three (3) 3' extensions, one (1) 30 lb. slide hammer, cleaning brushes, and a deluxe padded carrying case.

Ordering Information:
5/8" Threaded, Soggy Bottom Sampler System Quantity
5618.00 SBS Sampling System Complete 100.00 lb

Soggy Bottom Sampler System Replacement Parts Quantity
5618.105 SBS External Drive Tip
5618.106 SBS Internal Drive Tip
5618.168 SBS Lead Internal Rod for 2’
5618.169 SBS Upper Lead Internal Rod
5618.166 SBS Sampler Tube for 2’ Liner
5618.167 SBS Sampler Tube Upper Extension
5618.109 SBS Top Metal Core Catcher
18013 1-1/2" Plastic Core Catcher (White,Soft)
418.08 1 1/2" Plastic End Cap
5618.113 Internal Tip Chamber
5618.114 SBS Top Cap 1-1/8" X 2"
5618.115 SBS Thread Protector Cap
5618.116 1 1/8' Vented Hammer Adapter
5618.118 3/8” x 3’ Internal Rod w/ Coupler
400.93 3/4" Heavy Duty Slide Hammer
430.01 AMS Deluxe Carrying Case 1750
5009.05 Brush For 1 1/8" or 1 1/4" Direct Push Extensions
5004.06 1 1/8" x 3' Direct Push Extension
5009.09 Brush For 2 1/8" or 2 3/8" Direct Push Extensions
5006.84 Steel T-Handle, 3/8" Thread
5618.129 SBS Liner Removal Tool Assembly
5006.423 1 1/2" X 2' PVC Liner
5006.425 1 1/2" x 4' PVC Liner

Soggy Bottom Sampler System Accessories Quantity
5618.121 SBS Chain Pull Cap
18253 Hi-lift Jack for PowerProbe/SBS Tooling
10183 1 1/2' Basket Retainer - Red
1002.24 3/8” Couplers
418.16 .003" x 4" x 100' Perforated Roll of Fluoropolymer Film

Video